INSTALL INSTRUCTIONS C-TCB-21
TELESCOPING COMPUTER BASE
1998-2003 DODGE DURANGO
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard socket set
3/8” Metric socket set
Ratcheting wrench (3/8” drive)
Powered drill w/ 3/16” drill bit
Open-end wrench set
HARDWARE & COMPONENTS:
QTY DESCRIPTION
PART #
1
1
1
1
1
2
Pole support assembly
Telescoping pole assembly
Side support brace
5/16-18 Nylock nut
5/16” Flat washer
CM93071-21
CM93072-3
CM93146
GSM30017
GSM31006
GSM33060
¼” x 1” Hex head lag bolts
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
Side support
brace
¼” x 1”Hex
head lag bolts
Telescoping pole
assembly
Pole support
assembly
5/16-18
Nylock nut
Location of
passenger side factory
seat base bolts
C-TCB-21-INST-12-04
|
Grizzly Cordless Saw w1702 User Manual
Grizzly Saw G0734 User Manual
Haier Clothes Dryer HDM35 1 User Manual
Haier Microwave Oven HDE 2580EGB User Manual
Hamilton Beach Toaster 2 Slice Toaster User Manual
Honeywell Fan HF 810 User Manual
Hotpoint Stove 6440 User Manual
IBM Computer Monitor 21L4364 User Manual
Icom Two Way Radio iF22SR User Manual
Image Treadmill 850SE User Manual